Analytical Electronics Services Pvt Ltd

Budgetary Source of Test & Measuring Equipment

Authorized Distributor

AES, India - Authorized Distributor of Pico Technology   AES, India - Authorized Distributor of GW Instek   AES, India - Authorized Distributor of DranetzBMI
Buy Sell Rent Repair

PicoScope 4225 & 4425 Automotive Diagnostic Oscilloscopes

PicoScope 4225/4425

PicoScope Automotive Oscilloscopes India

Automotive Oscilloscope Price - AES, India

PicoScope 4225/4425 Datasheet

The recently introduced two-channel PicoScope 4225 and four-channel PicoScope 4425 are our 5th generation of automotive PC oscilloscopes. They are 5x faster and have 8x more memory than the previous generation, ensuring they are powerful enough for the next generation of vehicles with new technologies such as CAN FD.
Other innovations include:

  • New floating inputs for non-grounded measurements and voltage drop tests
  • Higher voltage ranges (up to 200 V without attenuators)
  • ConnectDetect® to ensure you have a good connection
  • Advanced triggers to capture intermittent faults
  • Hardware filters and frequency measurement
  • USB 3.0 connected and powered.

Arbitrary Waveform Function Generator

Get your
PicoScope 3400A/Bquotation today.

Related Links

PicoTech  |  Automotive Oscilloscope
Vehicle Diagnostics Kits

(All trademarks acknowledged) E. & O. E.

Floating inputs

Floating input channels are a unique new technology that allows safe, low-noise measurements even in situations where none of the inputs are grounded.
Floating inputs allow a single input to perform voltage drop tests (for example, along the battery to starter motor cable) and measurements on non-grounded signals like hybrid electric motor drives. With floating inputs the maximum allowable voltage difference between any two channel grounds is 30 V.
The inputs can now measure up to 200 V (up from 100 V on the previous generation of PicoScope). A key benefit is that external attenuators are no longer needed for measuring injector voltages.
Remember: on a floating-input scope, grounding one input does not ground all the others. You must provide signal and return connections for each input that you are using.

Memory buffer

The best way to diagnose an intermittent fault is often to set up the scope to measure from several components and wait for the fault to occur. For an intermittent misfire, you might want to capture several minutes of cam, crank, ignition and injector waveforms. These types of tests require an oscilloscope with a "deep" memory buffer, so that you can capture for long periods of time and then zoom in without any gaps or loss of detail.
With PicoScope you can collect 250 MILLION samples, more than any other automotive oscilloscope. Our advanced "always on" memory technology uses hardware acceleration to make sure that the processing of large amounts of data does not slow the oscilloscope down even when you are using a slower or older PC.

PicoScope 4225/4425 Oscilloscope Features

  • 2 or 4 channels
  • Up to 400 MS/s real–time sample rate
  • 20 MHz bandwidth
  • 250,000,000 sample memory
  • ±200 V input range
  • CAN bus and FlexRay compatible
  • Use with any vehicle

Ask for PicoScope 4225/4425 detailed specification.